Zyxel ART-157784
LTE7490-M904-EU01V1F EAN 4718937607006
Se ha añadido el artículo

Zyxel LTE7490-M904, Router exterior 4G LTE-A Pro

Número: ART-157784 EAN: 4718937607006 MPN: LTE7490-M904-EU01V1F

Router exterior 4G LTE-A ProRendimiento inigualable en zonas difíciles

Diseño fuerte, mayor durabilidad

Un diseño robusto permite que el LTE7490-M904 funcione en entornos gélidos y donde es difícil alcanzar la intensidad de señal deseada, pero también garantiza una mayor vida útil y fiabilidad del dispositivo.

Señal que viaja más lejos y más rápido

LTE7490-M904 emplea el 4G LTE-A CAT de las mejores prácticas. 18 con velocidades de datos de hasta 1,2Gbps/150 Mbps* (Enlace descendente/ascendente). Consigue hasta 8 dBi por elemento para un rendimiento de señal más fuerte y mejor con sus cuatro antenas direccionales de transmisión 4x4 MIMO de ancho integradas. Integra alta velocidad, señal fuerte y transmisión de largo alcance.

Conectividad continua

El LTE inalámbrico te permite aprovechar la segunda WAN sin necesidad de un plan de cableado. Mientras la pasarela soporte "Failover de doble WAN", puedes simplemente conectar el LTE7490-M904 a la pasarela existente y configurar LTE como WAN de failover para evitar el riesgo de caída de la red. Más aún, son modos de enrutamiento flexibles con funciones tanto de puente como de router. Independientemente de si ya tienes router o no, se puede desplegar e integrar fácilmente en tu entorno actual. ¡Disfruta ahora de una red flexible y constante!

LTE7490-M904, 4G LTE-A Pro Outdoor Router
LTE7490-M904, 4G LTE-A Pro Outdoor Router
LTE7490-M904, 4G LTE-A Pro Outdoor Router
LTE7490-M904, 4G LTE-A Pro Outdoor Router
Ficha Técnica Ficha Técnica

System specifications
IP networking

Supports IPv4/IPv6 dual stack (NDP IPv6)
DHCP server
Supports ICMP
Virtual Private Network (VPN) passthrough
Supports NAT/NAPT
Supports NAT DMZ
Supports port forwarding/triggering
Supports ALG
Routing

Supports router mode
Supports bridge (IP pass-through) mode
Supports dynamic DNS for first APN
Supports remote management under bridge mode
IP firewall

Firewall can be enabled or disabled via GUI
DoS attack prevention
Supports SPI
Application-level firewall
Filters LAN MAC addresses
Filters URLs
Management

Supports local/remote device management and firmware upgrade via TR-069, HTTP/web GUI and FTP
APN management
Account management
PIN/PUK management
Network selection
Operating frequency band selection
CLI/SSH (local and remote SSH access)
Supports UPnP IGD
Supports SSH with key access certification management
Supports bandwidth/quota management
Supports mobile apps (iOS and Android) for easy installation and local management only
Supports remote throughput testing by TR-143
WiFi Protected Setup (WPS)
Hidden SSID

Hardware specifications
LTE interface

Standard-compliant: 3GPP UE DL Category 18, UL Category 13
Supports LTE bands: B1/B3/B5/B7/B8/B20/B28/38/40/41
Supports DL transmission mode TM1/2/3/4/6/7/8/9
LTE antennas: 4 embedded directional antennas of up to 8 dBi/element (4x4 MIMO)
Supports DL 5xCA**, 2x2 MIMO
Supports DL 3xCA, 4x4 MIMO, B1/3/7**
Supports DL modulations QPSK, 16-QAM, 64-QAM and 256-QAM
Supports UL modulations QPSK, 16-QAM and 64-QAM
Supports UL 2xCA** intra-band, B3/7/38/40/41
Peak data rates:
DL: 1.2 Gbps within 100 MHz bandwidth
UL: 150 Mbps within 40 MHz bandwidth
UMTS Air interface

Standard-compliant: WCDMA bands 1/3/5/8
Supported frequencies:
HSPA+/UMTS: 2100/1800/900/850 MHz (bands 1/3/5/8)
WCDMA: 2100/1800/900/850 MHz
HSPA+ downlink data rates up to 42 Mbps
HSUPA uplink data rates up to 5.76 Mbps
WiFi Air interface***

Wireless standards: 802.11 b/g/n, 2.4 GHz, 300 Mbps
Wireless omni antennas:
WiFi 2.4 GHz: 2x2 internal antennas up to 3 dBi
Hardware Interface

One Gigabit RJ-45 PoE LAN port
One LED indicator for:
Power status
Internet status
LTE signal strength
WiFi status
LAN status
One WiFi on/off button
One 3FF micro SIM card socket
One reset to default button
Power specifications

Standard 802.3af/at Power over Ethernet (PoE)
Power consumption at PoE < 16 W

Power consumption
16 watt (peak)

Physical specifications
Item dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
Item weight: 1100 g (2.43 lb.)
Package dimensions (WxDxH): 280 x 402 x 108 mm (11.02” x 15.83” x 4.25”)
Package weight: 2520 g (5.55 lb.)

Environmental specifications
Ingress Protection rating

IP68 harden for outdoor environments
Lightning protection

K.21 enhanced mode, 6 kV
Operating environment

Temperature: -40°C to 60°C (-40°F to 140°F)
Humidity: 5% to 95% (non-condensing)
Storage environment

Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 95% (non-condensing)

Certification
CE
WEEE (Waste Electrical and Electronic Equipment) Directive certification
RoHS (Restriction of Hazardous Substances) Directive certification
HSF (Hazardous Substance Free)
European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste

Package contents
Standard 802.3af/at Power of Ethernet (PoE) injector
1.8 m Ethernet cable yellow 8P8C
PG19 thread (cable gland)
Quick Start Guide
Warranty card
DoC and safety warning
Wall/pole mounting kit
Wire grounding kit

Visualizado
Solicitud de información ¿Tienes alguna duda? Contáctanos. Estamos para asesorarte.
Empresa
Email*
Nombre*
Apellido(s) *
Comentario
Acepto la política de privacidad y protección de datos * He leído y aceptado las condiciones de privacidad y protección de datos.
* campos obligatorios