SFP+ 1m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for…
Fabricante:
MikroTik
Código:
ART-155015
MPN
XS+DA0001
EAN
-
SFP+ 1m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.
S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode…
Fabricante:
MikroTik
Código:
ART-155178
MPN
XS+31LC10D
EAN
-
S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
SFP+ 3m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for…
Fabricante:
MikroTik
Código:
ART-154565
MPN
XS+DA0003
EAN
4752224009005
SFP+ 3m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.
48 V 2 A 96 W power supply, to be used with our products that support 48 V POE output, like hEX PoE…
Fabricante:
MikroTik
Código:
ART-152270
MPN
48V2A96W
EAN
5706998244574
48 V 2 A 96 W power supply, to be used with our products that support 48 V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48 V 1.46 A 70 W), allowing more power per port.
Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new…
Fabricante:
MikroTik
Código:
ART-152147
MPN
CA433U
EAN
-
Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports.
La solución ideal para mantener la energía encendida en sus enrutadores de red. El 12POW150…
Fabricante:
MikroTik
Código:
ART-144651
MPN
12POW150
EAN
4752224002495
La solución ideal para mantener la energía encendida en sus enrutadores de red. El 12POW150 garantiza la continuidad operativa incluso durante el reemplazo, evitando interrupciones. Compatibilidad redundante : diseñado para dispositivos como CCR1072-1G-8S+, CCR2216-1G-12XS-2XQ y CRS518-16XS-2XQ-RM, que montan dos fuentes de alimentación de 12 V y 150 W en una configuración intercambiable en caliente. Intercambio en caliente sin interrupciones: La segunda fuente de alimentación se activa automáticamente si la primera falla, lo que permite un reemplazo en tiempo real sin necesidad de reiniciar el dispositivo.
S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode…
Fabricante:
MikroTik
Código:
ART-68268
MPN
S+85DLC03D
EAN
-
S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.